Видео

The 2800,3100,3400 has the same parts in it

All of them is commercial transmissions

It's a oil filter at 3100

Holy fuck kidney stones are HORRIBLE!! Had my 2nd one in 10 years, and frankly if I had a gun I'd not be here right now. Fortunately I went to the ER and it took WAY too long but they drugged me up good.

Does your mower make a grinding noise when you turn or pivot?

I remember this. Yep just sit there and record someone else's fuck up. Your a great guy.

Oh dang, I did this all kinds of wrong. 😝 Thanks for the lesson, sensei. 👍

You caught some great fish!

Hope next trial will test next table over shooting and if it is picked up at your table.

I have no idea why it became a "thing" to hate on this gun. I picked one up in the range kit for $400 at a local pawn shop and I love it - a micro-sized 1911 that holds 12 rds. Very easy shooting. Trigger issues? Seems exaggerated to me, never experienced any (maybe because I bought it used and it was broken in?) Yeah, would be nice if it had an optics cut and rail, but then it's not that kind of gun. It will fit in your pocket if need be.

Now THAT'S what I'm talkin bout. Looks like a great day on the water even with the wind. Can't get over how tall Brayden has gotten. He's growing into quite the fisherman. Loved the shout out. You've got my number, so just call if you wanta see Randy cry when we out fish him. LOL

i remember my first fish...

Nice review. But can we address your pronunciation of your ammo? Aguila, which is eagle in Spanish. Ah-gui-lah. The “u” is silent.

I have heard way too many bad things about Tracker. Like the prices though.

Excellent Video! But be careful your back. Lift your stuff with your leg.

Great day the only thing missing was tonya😢.... good catches.... brayden was the top catcher

best transom saver ever made was made here in baton rouge.la. was constructed of round tubing, was spring loaded therefor the spring allowed you to trim motor down compressing spring,actually locking motor down with hyd. pressure!! if your motor moves up & down at this point you have a check valve malfunction in the power trim manifold.think about it if you can run boat 50 mph down the lake trim your motor up & it holds that position,if it doesnt you have fluid bleeding off motor gos down !! there is also an impact valve in the system,in case you hit something it alows motor to raise up so you dont shear butt. end of boat off. O.M.C CORP. IN EARLY TO MID 90S were blaming transom savers for their gear housings collapsing where the transom saver riding on gear case(directly in front of water pick ups).seen several motors in warranty get turned down for repair,larger motors had built in trailering bracket!! I have a 1997 115 intruder that i have used the trailering bracket it actually mates to to clamp brackets that attatch mottor to transom,when trimming down my trim locks with no movement,owned this boat since 2008 & have no transom issues & travel probably the worst roads in country (south louisiana).

Too easy!! Thanks!!😊

The arguments against the transom saver defy physics. The boat is fastened securely to the boat at the back and the boat moves with the trailer. The motor being mounted to the transom becomes a lever independent of the trailerand induces tremendous foces on the transom. A 3rd point of contact minimizes the lever effect. The hydralic saver does reduce the impact, but not nearly to the same degeee as a proper transom saver.

l can't take a chance not knowing what's hidden under all that grass. Gotta do a thorough pre-inspection for hidden objects and sometimes l still might hit something. So afraid to damage my mower. Learned a lesson the hard way with my first mower.

Love moles.Have five hills on the grass outside.Just want to catch and move to field.

It is not designed for rapid fire because it builds up heat the melts the lead and can create other failures.

It loves hot ammo cause the slide is plastic so cheap ammo isn’t good

So, how do you get rid of moles in one day when they move in as fast as you can remove em? That's my problem. I wish it were a one day thing but, I've proven this theory wrong. Abby other suggestions for removing them in one day?

Direct and to the point for a new Cub Cadet owner, thank you!

I have a cub cadet riding mower, well I had one. It was a good mower but I always had to jump start it even after putting a new battery in it. I also have friends that have one with the same issue. Anyway, I brought it in to have a tune up and to fix the issues I was having. Got it back yesterday and got on it today mower my yard. Well, I wasn't even on it 15 minutes when the engine caught fire so now I have a new yard ornament.

Hey.. I went on the website, and it says the monarch doesn't fit the performance center version? Did you just get the trigger or a whole kit? I agree about the trigger being gritty I just picked mine up haven't even put round through it yet I was hoping after a few rounds that gritty ness would go away

When the hell did you buy that for 10.00 ? in the 1970s? The asshole that has the ace hardware, in Ontonagon MI. wants 30.00 for a Rubbermaid trashcan, 47.00 for a 3 lb. Bag of pistachios, 10.00 for a lb. Of butter, 90.00 for a 4 x 4 ft. 3/4 inch plywood, and well over a hundred dollars for a plastic tool box!

Trying to understand your issue. The gun fires properly when clean, but when fouled it doesn't? How is that the gun's fault? It is due to the ammunition. 22's are known to be dirty ammo.

I love Glocks

FINALLY!! You guys finally got the boats back out on the lake. Been waiting for that all year. You know, my LiveScope is a portable unit and I'm betting that Andy and I can out fish you and your choice of fishing partner in our own little tournament sometime. He he. Regardless, I'm looking forward to some fishing videos from you guys. Glad to see both boats running good.

I want to see a tournament video! I didn't consider it without livescope.

Mine worked great until this year. Bought in 2015, it’s 2024. Now it won’t pump past 45 PSI

Last year I bought the XT 1 54 inch and we upgraded from the 46 inch craftsman that we had for 30 years and this cub cadet is so tippy. We have hills on the property and the switch in the seat if you just wiggle a little bit, and shut the bar deck off I stayed with my craftsman😎

About 700 rounds today mostly aguila red box and then some old Winchester yellow jackets that were over 15 years old in a Ziploc 4 failures to feed cycled but no feed and then when I switched to Ziploc outdated crap one jam no real accuracy issue but boy is she a dirty girl

RR and 340 Daisy,just for plinking cans Red Rider is nice gun and you can’t destroy it, I hope you all have fun

Awesome! And still room to add on anything else you want. You guys got lucky I guess with that voltage meter being compatible with LifeP04 I thought they required one specific for Lithium. 👍

I wish Toro (or someone aftermarket) would come out with a flexible rubber discharge chute to replace the hard plastic one that breaks.

For me, i feel that shifting mechanism is the invention of satan! Me and dad had to exchange the impeller on his Honda 8HP 2003, and it was a hell to get it in a good position again! Now it´s decent and the R shift mode is back into function again, but it took it´s fair amount of time to reach there! We did mark it up, but still, it seems it was way too sensitive! /L

I wanted one with a passion.....until I held it. The grips are just too small.my pinky doesnt even touch rubber. I walked out of the shop with my cash.

Great video

I think the duck boat also found out the limit on that lake.

How much

I got one yesterday and I got it a J Tractors in Buna and was satisfied with everything they did for me and I got it because I have two acres and I liked the 23 HP instead of the 19 and both of my neighbors have one and has for long time and the guy I got it from said run it on full throttle for less vibration let it warm up few minutes also and take care of it because I was worried about mowing two acres with any mower but we will see

Can you do a video on how to Lubricate the Central Control Unit Stabilizer Rod bearing bolt washer?

I have a Colt 1911 Gold cup made by Walters. This is a full size 22 long rifle. This gun shoots very well.

I use the garden hose and flood them out. Find the run and stick the running hose in through the top of the lump and wait for him to come up somewhere...

Tossing it into the woods probably will help it immeasurably. Wonder if making bad shots on the golf course ends up with his clubs in the pond. Sig should be embarrassed for making a gun with continuing problems and then not fixing it. I bought a S&W 622 back in the early 90's and it had problems not feeding, light strikes, and ejecting and sent if back for repair and they put a Master Gunsmith to work on it and sent it back to me with a note from the Gunsmith apologizing for the inconvenience that their new gun had caused. Three decades later this thing is still the best shooting 22 I have, and I really appreciated them taking responsibility for their lack of quality and then took the pride to make sure that it was fixed for good.

Very long and boring

What a waste of our time